Fit checker
Will it fit my gun?
Two taps: caliber, then gun. You get the thread, the parts and every can rated for it.
Most common thread
1/2x28
Most Glock, Smith & Wesson and PCC barrels. SIG, HK and CZ often use M13.5x1 left-hand.
Bullet is .355 in. Any can rated for 9mm, including 10mm and .45 cans that list 9mm.
What you need
- Threaded barrel, 1/2x28 (or whatever your barrel is cut to)
- Booster piston in 1/2x28, unless your can ships with one
- Suppressor-height sights or a red dot that sees over the can
Cans rated for 9mm
Only cans whose maker lists 9mm. Tap one to compare it.
- HUXWRX Flow 45M5.4 / 7.4 oz · $708
Buy the booster piston for your barrel’s thread, plus suppressor-height sights.
- Banish 459.6 / 11 oz · $737
Buy the booster piston for your barrel’s thread, plus suppressor-height sights.
- Griffin Armament Revolution 4510.2 / 13.3 oz · $699
Buy the booster piston for your barrel’s thread, plus suppressor-height sights.
- SilencerCo Omega 45K10.7 oz · $636
Buy the booster piston for your barrel’s thread, plus suppressor-height sights.
- Rugged Obsidian 4510.7 / 12.8 oz · $727
Booster comes in the box. Add a threaded barrel and suppressor-height sights.
- Dead Air RXD910Ti11.4 oz · $929
Buy the booster piston for your barrel’s thread, plus suppressor-height sights.
- SilencerCo Hybrid 46M12.2 / 14.9 oz · $994
Buy the booster piston for your barrel’s thread, plus suppressor-height sights.
Heavy for a pistol: it’ll pull the front sight down.
Rifle-size bore: a little louder on pistol than a .45 can.
Buy from a dealer near you
Call ahead and ask if they can order the a suppressor or take a transfer from an online seller.
Threads listed are the most common for each caliber. Your barrel may differ, so check its markings or the maker’s spec before you buy a mount. Ratings come from each suppressor maker.